Open Loop Energy, Inc. has been designated by Parker Denison Hydraulics Division as an Authorized Warranty and Repair Center. Both of our locations have been accredited to meet their rigid standards for processes, equipment, and facilities. Only four companies have earned the AWRC designation in North America and of the four Open Loop Energy has two of the six locations certified by Parker Denison.
Open Loop Energy’s focus is on quality and consistency. Every part, pump, motor, cylinder, etc. that leaves on OLE facilities goes through a three step inspection before approval for shipment. This attention to details has earned Open Loop Energy many certifications.
Open Loop Energy is a strong supporter of the training and certifications by the International Fluid Power Society. See www.ifps.org for details about the organization’s training and certification programs. Through this organizations rigid testing and certification process customers can be assured they receive the high degree of fluid power knowledge in the industry from designated OLE employees. In addition an OLE employee serves on the board of directors for the IFPS.
|Brandon Jennings Reed||HS, MHM||Arizona|
|Chad C. Rolfe||AI, AJPP, AJPPCC, CC, HS,MHM,PS, S, SD||Arizona|
|Garrett C. Hoisington||AI, AJPP, AJPPCC, HS, MHM,PS, S||Arizona|
|Keith V. Payne||CC, MHM||Arizona|
|Lloyd W. Peck||CC, MHM||Arizona|
|Richard L. Henderson||MHM||Arizona|
|Steven D. Holmes||MHM||Arizona|
|Tate Hoisington||HS, MHM||Arizona|
|Bryan E. York||CC||Nevada|
|Edgar P. Cereceres||CC||Nevada|
|Jonathon Paul Crews||CC||Nevada|
|Raymond Thomas McFarlen||CC||Nevada|
|Rocky D. Phoenix||CC, MHM, MHT, MMH||Nevada|
|Nick Katavich||CC||New Mexico|
|Barton D. Hoisington||HS, MHM||Utah|
Open Loop Energy is proud to be an Authorized Repair and Warranty Center for Parker-Denison Hydraulic Division for Pumps, Motors, and Valves. To meet the requirements for this certification OLE must maintain certified technicians. The company currently has the following PDHD certified technicians:
|Garrett Hoisington||Factory Certified||Arizona|
|Bart Hoisington||Factory Certified||Utah|
|Chad Rolfe||Factory Certified||Arizona|
|Charles Pruitt||Factory Certified||Arizona|
|Rocky Phoenix||Factory Certified||Nevada|
|Brandon Reed||Factory Certified||Arizona|
|Bryan York||Factory Certified||Nevada|
|James Adame||Factory Certified||Arizona|
|Ray McFarlen||Factory Certified||Nevada|
|Sergio Flores||Authorized Repair Center Technician||Arizona|
|Rick Hornalez||Authorized Repair Center Technician||Arizona|
|Sean Abril||Authorized Repair Center Technician||Arizona|
Fourteen Trained Professionals
Open Loop Energy also has personnel trained in the Six Sigma Process for quality control and continuous improvement. Fourteen individuals have been trained and certified in the Six Sigma Methodology.
|Chase Fite||Six Sigma Black Belt Professional|
|Garrett Hoisington||Six Sigma Black Belt Professional|
|Erin D. Motes||Six Sigma Black Belt Professional|
|Tate Hoisington||Six Sigma Black Belt Professional|
|Bart Hoisington||Six Sigma Black Belt Professional|
|Brandon Reed||Six Sigma Black Belt Professional|
|Chad Rolfe||Six Sigma Black Belt Professional|
|Doug Holmes||Six Sigma Black Belt Professional|
|Keith Payne||Six Sigma Black Belt Professional|
|Nick Katavich||Six Sigma Black Belt Professional|
|Jonathon Crews||Six Sigma Black Belt Professional|
|Ray McFarlen||Six Sigma Black Belt Professional|
|Anissa Johnson||Six Sigma Black Belt Professional|
Open Loop Energy is ISO 9001:2015 certified at all locations to insure the focus on enhancing customer satisfaction.
Open Loop Energy, Inc. is also factory certified as repair centers for Duff-Norton large Jacks, and Enerpac/Simplex hydraulic equipment. Open Loop Energy meets ANSI Standards for heavy duty jack testing procedures and equipment.